Characteristic

• ■ Single unit: voltage: 0 ～2250V Current: 0 ～4500A Power: 0 ～180kW
• ■ The extended power of master slave parallel operation can reach 1.8MW
• ■ Voltage precision: 0.05%+0.05% F.S Current accuracy: 0.1%+0.1% F.S
• ■ The power factor is 0.99, and the overall efficiency is higher than 93%
• ■ Automatic compensation for wire loss
• ■ It has the functions of constant voltage, constant current, constant power and constant resistance
• ■ Voltage and current slew rate can be set
• ■ With battery discharge test function
• ■ It has sequence and waveform functions, and
  can realize complex voltage and
  current waveforms, such as automobile
  electronic test voltage waveform and user-defined waveform
• ■ Over voltage, over current, over power, over temperature, low voltage, power down, island protection and other comprehensive protection functions
• ■ High voltage isolation digital, analog, monitoring and control interfaces
• ■ The communication interface is equipped with LAN, USB as standard, RS485, CAN or GPIB as options
• ■ The communication protocol supports
  SCPI, MODBUS, CAN-OPEN (optional) protocols, and provides
  the upper computer and SDK development package for secondary development
• ■ TFT color LCD screen
• ■ Intelligent fan control
• ■ Standard 19 inch rack design, pulley design can be selected for more than 16U

Application field

• ■ Production and development of energy storage and micro grid equipment
• ■ Production and development of server power supply, UPS and inverter
• ■ Solar battery array, wind power applications
• ■ Fuel cell, power cell, lead acid battery, super capacitor applications
• ■ Aerospace, railway, new energy vehicles, motor driver test applications
• ■ UAV, laser, sensor applications

Energy feedback

biTRITON-L series products can recover the output energy of DC source equipment and feed it back to the internal power grid without pollution. The recovered electric energy can be directly used by internal appliances, reducing the heat energy generated by energy consumption, so as to achieve a win-win situation of work and energy conservation.

3U/18kW high power density

biTRITON-L series regenerative high-power programmable DC electronic load adopts high power density design. Compared with ordinary energy consumption electronic load, its volume is reduced by 80% under the same power, and its use is more flexible and convenient.

Sequence and waveform function

biTRITON-L series electronic load provides the sequence test function, which can edit up to 10 test files, 100 steps each. Support load time sequence changes in CC, CV, CR, CP and other modes, and support sequence editing functions such as file linking. Up to 5000 steps of time sequence editing can be completed, and the single step time range is 1ms~99999s.

Multiple work mode

biTRITON-L series has four basic operating modes of constant current, constant voltage, constant resistance and constant power, which can meet a wide range of test requirements. At the same time, it also has the functions of CV+CC, CR+CC, CP+CC multiple composite operation modes. Users can set the current limit value according to their own test requirements to avoid over-current damage to the test product during the test. Among them, CV+CC mode can be used to simulate the charging characteristics of batteries, test charging piles, vehicle charger and other similar products. CR+CC mode can simulate power supply voltage and current limitation and accuracy test.

Battery test

biTRITON-L series electronic load has battery test function. Three discharge modes of constant current, constant resistance and constant power are provided, and the discharge cut-off conditions can be set by yourself: cut-off voltage, cut-off time and cut-off electricity, If any of the three conditions is met, the discharge will stop. During the discharge, the discharge electricity and time will be recorded. biTRITON-L series conducts battery internal resistance and capacity tests by DC discharge method (DCR).

Sine wave dynamic loading

biTRITON-L series has the sine wave carrier current function, which can be used in the impedance analysis test of fuel cells.

Master-slave parallel

biTRITON-L series power supply allows for master-slave parallel of up to 10 identical units. In parallel operation, slave units download parameters from master unit and current are shared automatically.

Multi-interface and multi-protocol

biTRITON-L series provide a control software for Windows PCs,which can read test data, generate images, export reports, print reports, etc. In real time, it is convenient for customers to use.

Dimensions