PRODUCTS
biRAPID
Software Development Kit
HSDT-KIT-B
Development Library HSLiB
Sets of Library, data processors, and real time Debugging as a set is convenient for Current/Power Conversion control Software development.
It was originally purposed for our in-house engineer usage in order to increase the efficiency of R&D.
It is not simply ”How to Operate the Micro processor”, but is how to perform right ”System Control”, and that’s why our engineer has written set of software inside in order to make it as a easy toolset.
Development Library HSLiB
Achieve the figure that always used for power control into a library,and allow the micro processor to call it out for control purpose.
Setup an Intuitive debugging environment, HSDT-GUI
Debugging on real-time without stopping the program.
Data Processor 「HSDT-DP」 to connect to PC
Connecting the controller and PC with USB port.
| Debug | Serial connection | Through Variable Editor Function and Flash Write Function in HSDT-GUI |
|---|---|---|
| Waveform Data Transmission | Waveform Data transmitted via Variable Scope function in HSDT-GUI | |
| Watchdog Timer | CPU Embedded | Reset Signal Detection is determined by the function |
| Periodic Timer | 2 Ch/ 200MHz | 32-bit timer function for generating periodic interrupts |
| Asynchronous Serial Connection | 3ch | Through SCI function |
| CAN Port | 2ch | 125kbps~1Mbps speed with total of 32 Send/Receive message Box |
| Periodic Measurement | 6ch | Detecting the Edge of Waveform and measure the time. |
| Multiplex interrupt | Parallelly manage of multiple interruptions through Flagging towards Peripheral, PIE. etc. | |
| External interrupt | 5ch | Interrupt Function using External Input Signal to GPIO |
| Arithmetic | Trigonometric , Coordination Changes, Limit etc are available in Library | |
| Digital In/Out | Fixed port | Digital Input and Output can be handled. |
| EEPROM | Fixed port | Read/Write Function of Each Platform Circuit Board |
HSDT-DP Function
| PC Connection | USB (mini B) |
|---|---|
| Controller Connection | Specific Cable (Provided as accessory) |
| LED Indicator | Shows status of Debugging, Waveform indication tools |
HSDT-GUI Function
-
Waveform Display of Parameter in Control Program. Oscilloscope-like function such as Range Setting and Trigger Function Available -
Real Time Writing Function without Pausing the Program
How to Connect to PC
