biRAPID
Controller for Software Development
HECS-B/A
Compact Size with various functions embedded
12 signaling gate output unit equipped with High-ended TI Microprocessor and Xillinx FPGA that allow various of pulse pattern generation, and capable of driving 2 units of three-phase inverter parallelly.
Compact A6 size design that suitable for system integration.
12 bits AD conversion, and embedded with CAN communication system.
Compact Size with various functions embedded
High performance Microprocessor integrated with FPGA embedded in a compact size.
Capable of PWM output, AD conversion, and other communication functions embedded.
Suitable for software development and debug
Can be connect via either PC or USB port
Along with our HSDT-KIT-B, a SW Development and Debug can be setup.
Various I/O
12 Gate Signals output, 16 ch AD input, 16ch DI, 16 Ch DO and compact port with a variety of I/O.
Specification (Model: HEC-B/A)
Micro Processor | TITMS320F28377S (Texas Instruments) | 200 MHz Clock Frequency |
---|---|---|
FPGA | XC6SLX45 (Xillinx) | Spartan-6 |
Gate Signal output | 12 port | 5V TTL |
Error-Link I/F | 4ch | 5V TTL |
AD Input | 16ch | +/- 5V, 100kHz |
Digital Input | 16ch | 5V |
Digital Output | 16ch | OC Output DC5~30V/50mA |
Dim(mm) | W:90mm / D:130mm / H:130mm | |
Operational Temperature | 0~50℃ | No Condensing |
Power Supply | DC10.8~26.4V | |
Power Consumption | Less than 18W |
Related Function with our other products
Circuit Block I/F (Main Circuit) |
6ch | Interface directly to Circuit Block Maximum 6 Circuit blocks. |
---|---|---|
Error Link I/F | 4ch | Interface for Error Link Function with other platform products. Maximum 4 links. |
Our HSDT I/F | 1ch | Interface to HSDT-Data Processor. |
Main Function
PWM Generator | 12 port | Complement PWM Generator with Dead-time Function. Carrier wave can be selected from sine-wave, sawtooth-wave and reverse sawtooth-wave. |
---|---|---|
Digital In/Out | 16 Ch each | Isolated Universal Digital Input / Output. |
AD Conversion | 16 Ch | 12bit AD Conversion Function. Embedded microprocessor and FPGA can be used independently. |
Comparator | 8 Ch | Comparing input voltage with upper and lower threshold and activate Gate Block function whenever it is exceeded. |
Universal LED | Yellow x 4 Red x 4 |
Controlled by embedded program. |
Universal Dip Switch | 4 Ch | Read by embedded program. |
Asynchronous Serial Com Port | 3 Ch | RS485, RS232C and USB-UART are usable. |
CAN Com Port | 2 Ch | CAN port isolated from circuit board |
EEPROM | 512kBit | Embedded program to access EEPROM through I2C connection |